.png)
UNIV CHEMICAL & ADHESIVES is India’s First frontline Largest producer of Silica (SiO2 98%+). As per Indian Standard for Construction base Solutions, which has turned a new overleaf in the construction industry. It was founded in 1972 in Gujarat & started use from 2016.
The Basic Vision & Motive of the UNIV is to help people build their homes durable, heat& water resistive and UV protective at Economic Price by using innovative Ecofriendly construction technologies.
Description
UNIV– AP isis a premixed ready to use Silica (SiO2 98% +), Cement Base High Quality Adhesive Compound Designed for use with water to produce high strength thixotropic mortar, for laying Aerated Light weight concrete, Fly ash bricks, cement hollow blocks, Cellular concrete blocks or smoothing over the block work surface in layers of up to 2mm to 8 mm thickness, that meet and exceed the requirements of National and International Standards. For Thin jointing with high adhesion to contribute to load bearing capacity of masonry
Area of Application
- It Can be applied on Brick, Concrete block, AAC Block, Fly ash block and Concrete surface.
- For interior and exterior use for preparing thin bed adhesive for AAC, ALC and cellular concrete blocks.
Benefits
- High compressive Strength – Silica ( SiO2 98% +) base Ready Dry mixture Joint Morter give 25% More strength
- Consistency - Due to the modern advance manufacturing process and accurate multiple particle size distribution, the premix bags are consistent and delivered to consumer with premium quality.
- Saves Time - It’s a ultimate time saving product which doesn’t require stacking of individual materials and mixing it in an accurate ratio aiming towards on-time completion of project.
- Easy Application - The material is premixed and only water has to be added on site. This makes the process of plastering much easier and quicker.
- Minimum Wastage - The wastage caused in conventional sand during site mix process (sieving and mixing) of material is totally avoided.
- No curing required after block work is done
- Storage - Easy to maintain stock as equal size packed bag is provided.
- Higher Coverage - Due to density and high volume, it covers 240 to 100 sq. ft. with a thickness of 2mm - 8mm per one bag of 40 Kg premix.
- Economical - It provides high bond joint in short time. Improved adhesion between two blocks. Hence saves time and cost required for putty coating on inner wall and primer on external wall.
- Delivery. These eco-friendly uniformBlock Joint Mortar - AP premix bags are available round the year from our advanced modern automated plant to your desirable location anywhere in India or overseas.
Technical Information
| Bulk density | 1300-1450 Kg/m3 |
| Water powder ratio | 20% - 22% by weight |
| Fresh Wet Density | 1700-1800 Kg/m3 |
| Pot life | 1.5 Hr @ 30 C |
| Compressive strength | >11-12 MPa |
| Split Tensile Strength | >1.1MPa |
| Thickness of layer | 2 mm to 6 mm Layer |
| Water curing | Not Needed |
| Wastage | Almost Nil |
| Final finish | Smooth Finish |
| Initial Setting Time | 1.5 to 2.0 Hr |
| Final Setting Time | 27 Days |
Shelf Life It has a shelf life of 12 months from the date of manufacture. Store at cool and dry place.
Packing Size- 40 Kg Bag Size
Coverage Table for standard surface
| Size of Bag | Thickness of Plaster | Area of Coverage * |
| 40 Kg | 2mm | 220 to 240 Sq. Feet |
| 40 Kg | 3mm | 145 to 130 Sq. Feet |
| 40 Kg | 4mm | 110 to 120 Sq. Feet |
| 40 Kg | 6mm | 75 to 70 Sq.Feet |
| *blocks size in 600x200x100STC | ||
Consumption Tool / Calculator for Construction work Onavailable on our Web site
How To Apply
- Surface Preparation- Prepare the surfaces before the UNIV- AP application by removing oil, bond inhibiting agents, dirt, dust and laitance.
The cleaning can be carried out with suitable methods like by using wire brush, water jetting,mopping, etc.
- Mixing- UNIV- AP requires 20% to 22% of Normal Drinkable Water by weight of material (Example For40kg Bag requires 8 to 9 LitreDrinkable Water.)
Mix Univ - AP to the measured quantity of water using mechanical stirring for 2-3 minutes to ensure a consistentlump-free mixture.
- Application- UNIV-APcan be used by mortar trowels, spatula and can also be applied by normal masons
- Precaution–safety
As per health & safety rules. Use of safety accessories is required, which includes:
a) Safety gloves
b) Safety goggles
c) Dust &nose mask
d) Helmet
In case of accidental contact with eyes of either dry or wet mix, immediately wash your hands; make sure your hands are clean and then wash your eyes with clean water and if required, seek medical assistance.
Avoid breathing dust.
DISCLAIMER
All the results and facts mentioned in this above document are applicable under normal conditions and when the product is used as per the instructions and guidelines provided are followed. TheUNIV CHEMICAL & ADHESIVESdoes not assume any responsibility or liability for deviations and discontentment attributes towards environmental, climatic, temperature, humidity aspects, etc. and to the methods of usage followed by the consumer.